colorFabb Special Glowfill Filament pour imprimante 3D, 2,85 mm, 750 g

Marque: colorFabb
Matériau: Plastique
Couleur: Brown
Poids de l'article: 750 Grammes
Code article international: 08719033555136
Nombre d'unités: 750.0 gramme
Fabricant: colorFabb
Nombre d'articles: 1

- Light-Charged Glow Magic for Your Prints With glowFill you can turn everyday 3D prints into luminous, eye-catching creations. This filament blends a PLA/PHA base with a highly-concentrated phosphorescent pigment, so your model glows in the dark after exposure to light. In daylight or standard lighting it prints like a smooth, creamy filament, and once you switch off the lights it reveals a fun, glowing effect — perfect for decorative accessories, toys, signage and fun projects. Print tip: Use nozzle temperature ~195-220 °C and bed ~50-60 °C (if used). Print at moderate speed (40-100 mm/s) and use 100 % infill for maximum glow intensity.
- Easy to Print, Reliable PLA/PHA Base with Special Effect Don’t let the name “glow” fool you – the filament is built on the trusted PLA/PHA platform with diameter tolerance within ±0.05 mm and density ~1.210-1.430 g/cm³, so you benefit from familiar print behaviour and predictable results.Use the same hardware you already own, expect good layer adhesion, and benefit from standard settings: 195-220 °C nozzle, optional heated bed 50-60 °C. Usage advice: Use a clean nozzle, moderate cooling, and ensure your part is exposed to a strong light source before turning off lights — the glow effect is charged by light exposure.
- Creative, Functional & Glow-Enabled Applications With glowFill you open up a world of creative applications: from night-time signage, keychains, toy elements and themed props, to emergency markers, glow-in-the-dark décor and fun educational models. The luminous finish stands out in low-light conditions, while in normal light it behaves like a standard PLA/PHA material. This makes it both visually impressive *and* versatile. Pro tip: For maximum glow duration, print with 100% infill and keep walls thick enough (~1.2 mm) so that the pigment load is high. After printing, expose to bright light (sunlight or LED) for a few minutes.